Superfish Spare Parts: Fixing Qubiq 60 and Hang-On Filters

Quick answer

Match the symptom to the part before you order: a noisy or stalled pump usually needs a rotor or pump assembly, while cracked hoods, hinges, or filter housings need the corresponding structural spare. For Hang-on filters, the rotor and pump are the only listed service parts, so any other failure means replacing the unit.

Symptom-to-part diagnosis

• Qubiq 60 pump is noisy or not turning: Switch off and unplug the unit, remove the pump, and inspect the rotor and impeller well for grit or wear. If the rotor is worn or cracked, order the Qubiq 60 Pump Rotor. If the motor body or winding has failed, order the complete Pump in the matching colour and plug type. If the rotor looks intact and clean but the pump still will not run, stop and treat it as an electrical fault rather than ordering more parts.
• Qubiq 60 hood, hinge, or housing is cracked: Identify whether the damage is in the hood and ballast assembly, the column and hinge, or the filter housing, and order that specific part in white or black to match your tank. Do not substitute a part from another Qubiq size. If the crack lets water reach the ballast or wiring, stop using the tank until the part is replaced.
• Hang-on filter is noisy or has stopped pumping: Clean the rotor and impeller chamber first. If wear or damage remains, order the rotor for your model: Hang-on 50 Rotor or Hang-on 100/200 Rotor. If the motor has failed, order the matching Hang-on 50 or Hang-on 100/200 Pump with UK plug. If the Hang-on body, clip, or intake is cracked, no listed spare covers it, so choose a replacement filter instead.
• Power supply or ballast failure on the Qubiq 60: The Qubiq 60 list includes a power supply and a ballast with UK plug. Confirm which component has failed before ordering, and do not attempt to repair mains wiring yourself. If you cannot identify the failed component with confidence, stop and seek advice rather than ordering both parts speculatively.

Parts that cover the common faults

• Superfish Spare Parts - Qubiq 60: Qubiq 60 spares include hood and ballast assemblies in white or black, filter housings, columns and hinges, pump rotors, power supplies, and complete pumps. You can replace the exact failed component instead of the whole tank, but you must pick the correct colour and part option when ordering.

  

• Superfish Spare Parts - Hang-on Filter: Hang-on spares are limited to rotors and pumps for the Hang-on 50 and Hang-on 100/200 models. A noisy or stalled Hang-on pump is repairable, but structural or housing damage is not covered by a listed spare.