Back to Blog
How-to Guides 2026-11-17 Pro Shrimp 0 views

Dennerle Nano Cube 30L White Glass: Setup and Planting Guide

Dennerle Nano Cube 30L White Glass: Setup and Planting Guide

Plan a planted nano tank around the Dennerle Nano Cube 30L White Glass, from unboxing and placement to planting and the first cycle.

Start with what the Nano Cube actually gives you

The Dennerle Nano Cube 30L White Glass is a design aquarium with rounded corners, made from white glass. It is intended as a little piece of nature for your home and is described as ideal for plants, shrimp, crabs and snails. The package includes an underlay and a cover glass.

That combination shapes your setup: the underlay protects the base, the cover glass limits evaporation and keeps livestock in, and the white glass changes how the tank reads in a room. The rounded corners also mean you should plan planting and cleaning with soft, curved access in mind rather than square-corner scraping.

Key facts for planning

  • Dennerle Nano Cube 30L WHITE GLASS: Dennerle Nano Cube 30L Nano Aquarium with rounded corners, made from White Glass The rounded-corner white glass form is the starting point for placement, viewing angle and planting style.
    Dennerle Nano Cube 30L WHITE GLASS
    Dennerle Nano Cube 30L WHITE GLASS
  • Dennerle Nano Cube 30L WHITE GLASS: Includes underlay and cover glass You do not need to source these two basics separately before setup.
  • Dennerle Nano Cube 30L WHITE GLASS: Ideal for plants, shrimp, crabs, snails This is the livestock and planting direction the manufacturer states, so build the tank around that rather than around large fish.

A practical setup sequence

The supplied record does not include a step-by-step operating manual, so treat this as a planning sequence built from the listed components and intended use. Check any Dennerle documentation that comes with the tank before you fill it.

  1. Place the underlay first: The underlay is supplied with the tank. Put it down before the glass so the base sits on a protected surface, and choose a level spot that can carry the filled weight.
  2. Position the empty tank before adding anything: Decide on the final spot with the empty cube. White glass and rounded corners look different from different angles, and moving a filled tank is far harder.
  3. Plan the planting layout: Because the tank is intended for plants, shrimp, crabs and snails, sketch where taller plants, low foreground plants and open swimming or foraging space will go. Leave access to the rounded corners for maintenance.
  4. Add substrate and hardscape, then plant: The record does not specify a substrate or hardscape, so choose those to suit the plants you want. Plant before filling to keep the layout stable.
  5. Fill carefully and fit the cover glass: Fill slowly to avoid disturbing the substrate, then place the supplied cover glass. The cover reduces evaporation and helps keep snails and crabs from climbing out.

Planting for shrimp, crabs and snails

The Nano Cube is described as ideal for plants, shrimp, crabs and snails, which suggests a planted invertebrate setup rather than a fish-first tank. Plant densely enough to give shrimp and snails cover, but keep some open ground for foraging and viewing.

Crabs need particular thought. The supplied record does not confirm how the cover glass fits or whether it seals every gap, so check the fit yourself before adding crabs. A cover that sits flush is more useful than one with obvious openings.

Filtration and the first cycle

The product record lists the tank, underlay and cover glass, but it does not include a filter, heater, light or pump. That means the Dennerle Nano Cube 30L setup is not a complete kit as described here: you will need to choose filtration and other equipment separately.

For the first cycle, the record gives no cycling instructions, no test values and no timeline. Use a reliable ammonia and nitrite testing routine and follow the instructions for whichever filter and biological starter you choose. Do not add shrimp, crabs or snails until the tank is consistently processing waste; the supplied information does not set a number of days for this.

Checkpoints before livestock go in

  • Underlay in place and tank level: The underlay is part of the supplied package, so use it from the start rather than after the tank is filled.
  • Cover glass fitted: Check that it sits correctly and limits escape routes for snails and crabs.
  • Filtration running and cycle stable: Confirm ammonia and nitrite are being processed before adding the invertebrates the tank is intended for.
  • Planting settled: Make sure plants are rooted or attached and not floating loose before shrimp and snails start exploring.

What the supplied information does not settle

The record gives the model name, glass type, rounded-corner design, intended livestock and plant use, and the inclusion of underlay and cover glass. It does not give a filter, lighting, heating, substrate or cycling procedure. Any advice beyond those facts should come from the equipment you choose and its own instructions, not from assumptions about this tank.

Related Articles

Customer Service
Home
Products
Cart
Profile